Payment & Shipping Terms:
|Application Process:||Injection Molding, Blowing Film, Extrusion, Etc.||Colour:||White Or Grey|
|MFI:||≥1.5 G/10min||Ingredient:||PE, CaO, CaCO3|
|Water Absorption:||20% Of Self-weight||Melting (℃):||130℃～140℃|
moisture absorbent masterbatch,
anti corrosion masterbatch
Absorb Water Desiccant Masterbatch For All The Recycled Plastics
Recycled PP or PE materials often contains some moisture,if not eliminated, the moisture will generate spot or bubbles on the surface of the end products , besides quality affected, the moisture even cause impossibility of processing. Our desiccant masterbatch is designed specifically for removing moisture from recycled PE/PP during processing. Its great advantage is it can effectively absorb moisture while processing, so that the recycled PE/PP scraps and granule could be directly used to make plastic products without pre-drying.And the product quality could be proved to be very good.
High water absorption, high weather resistance, fast flow rate, uniform dispersion, good compatibility, resistance, tensile resistance, corrosion resistance, easy to mix, Non-toxic, non-stimulation, good plasticizing, uniform Particle size,not to chock the mesh,suitable for automated production,Is an ideal additive
|Colour||White or grey|
|Application process||Injection molding, blowing film, extrusion, etc.|
|Suitable for||PE or PP|
|Ingredient||PE, CaO, CaCO3|
|Valid time||12~48 hours after bags open|
|Water absorption||20% of self-weight|
|Function||Eliminate the moisture in plastic raw materials|
|Active ingredient||50-80% or more|
1. The lubricating effect is high temperature and long-lasting, does not corrode equipment, has no pollution, and has no toxicity;
2. Good compatibility with resin, balanced internal and external lubricating effect, no frost, and difficult to scale;
3. Excellent heat resistance and chemical stability, no decomposition and non-volatile during processing; good ductility and elongation.
When the defoaming masterbatch is stirred with the moisture-affected plastic material directly, the product can be processed and produced. For example, the proportion of defoaming masterbatch added is 1%-2% for blown film production. If used in sheet and injection moulding production, the addition ratio is 2%-5%. If used in pipe production, add 2%-5%. Specific addition proportion should be added at the discretion of users according to the moisture condition of plastics.
Contact Person: sales