Payment & Shipping Terms:
|Ingredient:||PE, CaO, CaCO3||Valid Time:||12~48 Hours After Bags Open|
|Effective Ingredient Content:||≥98%||PH Range:||≥7|
flame retardant masterbatch,
Injection filler master batch is mainly used in the processing of plastic products, the purpose is to improve the performance of plastic products, or to reduce the cost of raw materials for plastics, to achieve the purpose of increasing production.
The injection-filling series master batch uses micron-level inorganic powder as the filler material, and is optimized and combined with carrier resins, high-efficiency lubricants, dispersants, tougheners, stabilizers and other auxiliary agents, which have good dispersibility and processing Flowability and temperature resistance.
It is mainly suitable for PE, PP, PS and ABS injection molding products. It can improve the strength, rigidity and surface hardness of the product. It can also increase its impact strength, reduce heat shrinkage and improve dimensional stability. Filling modified masterbatch for injection molding.
1. High effectiveness humidity absorbing on market.
2. Low dosage -keep better mechanical properties
3. Unform micro particle diameter, no joint particles
4. Long valid time of outside package
5. No mesh-clogging
Filler Masterbatch is made of high quality Calcium Carbonate and other special additives after extrusion molding from high performance twin-screw machine. It is widely used for polyolefin material in the process of extrusion, injection, plastic blowing, film blowing, casting, etc. When it is put into use, we can reduce material cost, and improve the character of final products.
|Colour||White or grey|
|Application process||Injection molding, blowing film, extrusion, etc.|
|Suitable for||PE or PP|
|Ingredient||PE, CaO, CaCO3|
|Valid time||12~48 hours after bags open|
|Function||Eliminate the moisture in plastic raw materials|
50-80% or more
1. Disperse well
2. Good color stability
3. High re-appear value
4. Can be processed easily
5. Can be applied to various platics
When the defoaming masterbatch is stirred with the moisture-affected plastic material directly, the product can be processed and produced. For example, the proportion of defoaming masterbatch added is 1%-2% for blown film production. If used in sheet and injection moulding production, the addition ratio is 2%-5%. If used in pipe production, add 2%-5%. Specific addition proportion should be added at the discretion of users according to the moisture condition of plastics.
Check the condition of inner pa cking and forbid using if damaged;
Should avoId direct contact with masterbatch with hand, when mix them;
Should avoId exposure in the air and recommend you use up them
Within 8 hours when mixed raw material;
Not allowed to heat and dry along with raw materials;
The product not be used up, should be heat-sealing packaged as soon as possible.
Q. Are your manufacturer or Trading Company?
A: Xinyang is professional manufacturer, more than 12 years experience and specialized in producing this product.
Q. How to proceed an order for masterbatch?
A: Firstly, let us know your requirements or application.
Secondly, We quote according to your requirements or our suggestions.
Thirdly, customer confirms the samples and places deposit for formal order.
Fourthly, We arrange the production.
Q. How to guarantee the quality?
A:Our products are passed , we have quality controller who do test everyday.
Q. How to use masterbatch?
A: just mix up with the resin granules according to the dosage ratio under appropriate temperature.
Q. How long the masterbatch could be stored?
A: If stored under a dry and cool environment, the quality of masterbatches will not change even after a long period of store, for the pigments fixed on the carrier resin which stay in a closed state.
Q. Does the masterbatch need to be dried before use?
A: In general it can be used directly except ABS and some expecial masterbatches mentioned, which should be dried according to common method.
Q. What’s the price?
A. The price here is just for your reference, the final price is subjected to our final confirmation in line with composition, specification, quality, and quantity of products.
Q. How long is the turn around time?
A. The production time will depend on the quantity and the complexity of masterbatch.
Q. What’s the shipping freight?
A. It will depend on the volume and weight of the materials. Pls. tell us the nearest seaport or airport, we can quote you specially.
Q. Free sample is available?
A: Yes, please send us your required specific, we will make customized sample for you.
Contact Person: sales