Payment & Shipping Terms:
|Colour:||White Or Light Gray||Grade:||Industrial|
|Active Ingredient:||50-80% Or More||Shape:||Granular|
|Suitable For:||PE Or PP||Ingredient:||PE, CaO, CaCO3|
|Dosage:||1%~5%||Water Absorption:||20% Of Self-weight|
anti corrosion masterbatch
Light Gray Functional Masterbatch Integrating Water Absorption Sterilization Reaction
A new generation desiccant designed to absorb moisture during the processing of recycled PP, PE materials, instead of traditionally drying equipment with high cost of energy and labor, desiccant do not block meshes and ultra-high humidity absorption reduce dosage. Low dosage protect from mechanical properties and avoid paper-like effect of final product.
Plastic dewatering and defoaming agent integrates water absorption and sterilization reaction. Add plastic dewatering and defoaming agents) to the production process of plastic products, eliminating the need for dryers, saving energy and reducing emissions. Not only can eliminate the moisture in the plastic ingredients, but also sterilize at 400 degrees. Enhance the compactness and finish of the product, and improve the physical and mechanical properties of the product. Increase the amount of colorants, fillers, and recycled materials, so as to achieve continuous normal production and reduce production costs.
1. High effectiveness humidity absorbing on market.
2. Low dosage -keep better mechanical properties
3. Unform micro particle diameter, no joint particles
4. Long valid time of outside package
5. No mesh-clogging
|Colour||White or grey|
|Application process||Injection molding, blowing film, extrusion, etc.|
|Suitable for||PE or PP|
|Ingredient||PE, CaO, CaCO3|
|Valid time||12~48 hours after bags open|
|Water absorption||20% of self-weight|
|Function||Eliminate the moisture in plastic raw materials|
|Active ingredient||50-80% or more|
1. Check the package if in good condition before using
2. Once mixed with raw material, use it up timely
3. Don’t heat up with recycled raw material
When the defoaming masterbatch is stirred with the moisture-affected plastic material directly, the product can be processed and produced. For example, the proportion of defoaming masterbatch added is 1%-2% for blown film production. If used in sheet and injection moulding production, the addition ratio is 2%-5%. If used in pipe production, add 2%-5%. Specific addition proportion should be added at the discretion of users according to the moisture condition of plastics.
Contact Person: sales